composite wood timber deck joint

composite decking is less stable than wood so it tends to grow and shrink across the length of the boards as it heats and cools. proper spacing will allow some . make sure you level both joists to the same height and fasten with 4 screws every 12" to support the composite butt joints. grooved decking with hidden fasteners.

timber decking comes in softwood and hardwood variants, but softwood from evergreen coniferous trees such as scandinavian redwood, spruce and larch tend to be most popular . composite decking comes in various forms, but tends to be comprised of a recycled plastic and wood compound with a hard plastic shell.

i install decking with a gap in miter joints and between the butt ends of boards, using the same spacing for both. the space between butt ends is actually required by some synthetic decking manufacturers, but it's also good practice for wood planks. if the decking is butted together, it's going to hold water, .

once we had removed the old wood deck boards, we installed trex enhance composite decking. enhance composite . rather than driving nails or screws through the face of each board, these clips are tucked into the groove on the side of each board and screwed down to the joist. then the groove of the .

unlike wpc, plastic decking is 100% recyclable as it contains no wood fibres or fillers. it's highly stain-resistant, doesn't require finishing and won't ever crack, warp, or splinter - but it does have its downfalls. it's vulnerable to expand and contract in certain climates, which can loosen joints and make the .

composite decking comes in longer lengths than timber, so it is easier to install a deck with either no joints or very few joints. we can also change the design to utilize the best pattern for look, feel and design. we can design the deck to maximize the usage of material as well. wood composite decking is a wonderful solution .