building with trex 2x4

build a deck with composites and other rot-resistant materials for longevity. your deck will also look better and requi.

to get up to date, i talked with the local building department and studied its literature though no permit was required because the decks would be less than 30 inches high. i crunched through . instead, i simply screwed my 2x4 top and bottom rails to the deck side of the posts. it's faster and probably .

lay trex boards on top of the frame, parallel to the long edge. use 10-foot long, 5/4x6 decking (the standard size for trex decking boards) . attach the trex to the frame using one 5/8-inch treated deck screw, two in each joint, between a horizontal 2x4 and the trex board.

trex enhance decking, hideaway hidden fasteners, and transcend railings.

shop deck rails in the deck railings section of . find quality deck rails online or in store.

here are a few 'tricks of the trade' that front range lumber has learned in the 14 years we've been dealing with trex products. this is not to be interpreted as a warranty nor should any of these hints override any of trex's own instructions. please refer to their full instructions or call 1-800-buy-trex or .

trex. we use this wood-plastic composite lumber for the deck surfaces outside our screened porches, as well as for rail caps. it's good looking, machines easily, and . we assemble the pressure-treated porch enclosure system on the deck, using 4x4 uprights to define the openings, a 2x4 bottom plate, and a 1x4 top plate.

building decks with wood-polymer composites, i suggested trex decking (), which fit the bill perfectly . after tying the supports together with a vertical trex 2x4 as a facing, we ripped, bent, glued and then screwed 5/4x6 trex for the bench seat as we had for the railing.

building composite stairs.

building and insulating projects, find it at mclendon. we carry basalite-dupont, insulfoam, roxul, trex composite decking and western wood.