widen deck floor boards spacing

gap between pressure treated wood deck boards depends on how dry the wood you're using is. leave gap: if the pressure treated wood has been kiln dried after treatment (kdat), leave a 1/8 gap (the thickness of an 8-penny nail) between the boards when attaching, since the wood will expand slightly .

quite a few boards have no spaces between them b/c of layers of paint filling them in. we want the rain melted snow to to drop under neath the deck. what type of saw or tool could we use to shave back the edges of the deck boards? it is not leaf debris; it's layers of paint that block the space between the .

stretch a string across the deck joists to detect high spots and then plane them down with a power hand planer. this might seem . one way to support the perimeter boards is to add an extra joist 5-1/2 in. away from the outside joist and then install a 2×6 on its side between the two joists . check your joist spacing.

deck is one of the most pleasant ways to expand a living space. as an extension from your house, it's a way to relish the beautiful outdoors while still enjoying the convenience of being just a step away from your home. it's also one of the most popular ways to entertain a big party: a deck not only increases the available .

if the gap in between the deck boards is too narrow use the saw guide by lounsbury products. this circular saw attachment will make it easy to widen the gap. it can also straighten mismatched boards and clean out debris from in between the boards.

my deck has so many coats of paint the gaps between deck boards are completely filled in. how can i get the saw guide down in there to clean out the old paint?

an askthebuilder reader, alan peck, asks if the gaps between his deck planks get be widened. the deck construction wasn't . on the issue of gaps that are two narrow, mostly because the deck was set down badly, what would you think of my running a power saw down the gap? of course i'd have to .

planks should typically be spaced between " and ¼" apart. any bigger and high heeled shoes can get trapped. at this typical width, ice can easily clog the gaps, but the consequences of widening the gaps, in terms of creating a trip hazard, won't be worth it. i would not recommend enlarging the gaps .

if the spaces between boards are too narrow for either tool, consider widening them with a circular power saw. set the saw's blade depth to the thickness of the deck boards, and make careful passes with the saw along the seams. use a heavy-duty blade with carbide teeth to produce a gap of about .

decks that are sold kiln-dried and which definitely need room to expand. treated lumber is often . the boards we got were pretty damp, and the gap between planks opened up noticeably after 3 months or so. not so much we had to do .

if your decking boards are wet/green (not dried out or seasoned), i'd skip the spacing process altogether because as the boards dry they'll create their own space. most builders drop . screws tend to be more secure than nails because they stay attached as the boards expand and contract with the seasons.

building a deck can make your outdoor living space more enjoyable and usable; providing a space to look over open space and enjoy barbecues and gatherings. when building a deck, you need to space the deck boards out to allow for expansion and contraction of boards; wood will expand during heat or .

deck boards quickly accumulate small debris and dirt then what little gap exists is blocked and the puddles begin. thanks by the . i agree with earlier comments--not tough at all to make a few saw passes to widen the gaps, but no deck i work on is going to be left with the resulting hard corners. so that .

deck boards that is equal to the kerf (width) left behind by the saw blade. the kerf will probably not be as wide as the decking manufacturer recommends but it will certainly be better than not having a space at all. the kerf could be widened with a second pass or the .

ever have a customer tell you the following when beginning a deck installation? i want no gap between the boards or, i want a 1/4 gap between my deck boards your reply should be, when? like a stopped watch that is only right twice a day, those deck boards are going to expand and contract as the .

planks throughout a pattern . spacing. wood swells when it is wet, and it will also expand in warmer weather. deck boards are best installed when dry, and you should include at least a 1/8-inch gap between any pieces that meet up against each .